Whole Home and Undersink Systems Supplied and Installed Across Greater Melbourne

Melbourne's Trusted Water Filter Specialists

Melbourne’s tap water comes from some of Australia’s cleanest catchments, but by the time it travels through ageing distribution pipes to your home, the quality has changed. Chlorine, chloramines, sediment from older pipe networks, and emerging contaminants like PFAS are all present in Melbourne’s supply. Armour Water Filtration installs WaterMark-certified water filter systems across all Melbourne suburbs so your family gets clean, safe water from every tap, every day.

Melbourne's older inner-city pipe networks are a significant source of sediment, rust, and particulate contamination in household water. Homes in Fitzroy, Richmond, Collingwood, Brunswick, and similar suburbs are particularly affected. Armour's Stage 1 sediment filter captures pipe debris before it reaches your taps.

What Is Really in Melbourne's Tap Water?

Melbourne’s water supply is managed by Melbourne Water and drawn from protected catchment reservoirs including the Thomson, Upper Yarra, and Cardinia systems. The source water is considered among the cleanest in Australia. However, the journey from reservoir to your tap introduces a number of issues that source quality alone cannot prevent.

Chlorine and chloramines are added during treatment to ensure the water remains bacteria-free across Melbourne’s extensive distribution network. In older inner-city and inner-suburban areas, ageing cast iron and lead-jointed pipes introduce rust, sediment, and in some cases trace lead into the supply before it reaches your home.

PFAS contamination has also been detected in water sources across parts of Victoria, particularly in areas near former military sites and industrial zones. Melbourne Water actively monitors for PFAS but standard treatment processes are not designed to remove these compounds from drinking water.

Why Melbourne Homeowners Choose Whole Home Water Filtration

Melbourne has a reputation for good water. That reputation is based on source quality, not what comes out of your tap. The reality of Melbourne’s water, particularly in older suburbs, is quite different. Whole home filtration addresses what the distribution network introduces between the reservoir and your home.

Pipe Sediment and Rust

Melbourne's inner and middle-ring suburbs have some of the oldest water infrastructure in Australia. Rust, scale, and pipe debris are common in established suburbs. Armour's Stage 1 sediment filter removes these particles at the mains before they reach any tap, shower, or appliance.

Chlorine and Chemical Taste

Melbourne water often has a noticeable chlorine taste and odour, particularly in areas further from the treatment plant. Armour's Stage 2 KDF-55 and coconut carbon stage significantly reduces chlorine, chloramines, and chemical byproducts.

Scale on Fixtures and Appliances

While Melbourne water is softer than Perth, hardness minerals still cause scale buildup on shower screens, taps, and inside hot water systems over time. Armour's Stage 3 limescale reduction filter reduces mineral accumulation throughout your plumbing and appliances.

PFAS in Drinking Water

PFAS contamination has been confirmed in parts of Victoria's water supply. Standard municipal filtration does not remove PFAS. Armour's Smart RO undersink system provides the most effective available residential solution for Melbourne homeowners concerned about PFAS.

Dry Skin and Hair in Melbourne

Despite Melbourne's softer water, the chlorine and chloramine content still strips natural oils from skin and hair, contributing to dryness, sensitivity, and irritation. This is particularly noticeable in a hot shower where chlorine vaporises and is absorbed through skin and lungs.

Get Cleaner Safer Water For Your Home

Book your free water assessment today and discover the best water filtration solution for your home. Our experts identify water issues and recommend the right system for clean safe great tasting water.

Water Filter Systems for Melbourne Homes

Whether you live in a renovated Victorian terrace in Fitzroy, a new build in the outer south-east, or an apartment in the CBD, Armour has a water filter system sized and configured for your Melbourne property. Every system is installed by a licensed local technician.

Armour Whole Home Filtration System

3-stage point-of-entry system installed at your Melbourne home’s mains connection. Filters every litre of water before it reaches any tap, shower, bath, or appliance.

Reduces: chlorine, chloramines, sediment, rust, heavy metals, limescale, chemical byproducts.

From $3,000 installed | 5-Year Warranty | WaterMark Certified

Smart RO Undersink Drinking Water System

5-stage reverse osmosis system installed under your kitchen sink. Removes fluoride, PFAS, nitrates, dissolved salts, and fine contaminants down to 0.0001 of a micron.

Built-in smart monitor, booster pump, alkaline post-filter, and leak detection included.

WaterMark Certified

Replacement Filters for Melbourne Systems

Genuine replacement filters for all Armour whole home systems. Precisely matched to the 20 inch x 4.5 inch Big Blue housing and Melbourne’s local water chemistry conditions.

Automatic email reminders with every installation so you never miss a filter change.

Contact Armour for current pricing

How We Install Your Water Filter in Melbourne

Armour’s Melbourne team handles everything from assessment to installation. You do not need any technical knowledge. We manage the entire process and leave your home clean and tidy.

Free Melbourne Water Assessment

A local Armour specialist visits your Melbourne home, assesses your water quality and plumbing setup at no cost, and recommends the right system for your property type and suburb.

Custom System Design

We configure your system for Melbourne's water conditions. Older inner-city homes with pipe sediment concerns are configured differently to new builds in the outer suburbs. Your system is built around your actual water.

Licensed Installation

A WaterMark-licensed plumber installs your system at your mains connection point. Most Melbourne installations are completed in 1 to 2 hours. Fully compliant with Victorian plumbing regulations.

Ongoing Support

Automatic filter reminders, a 5-year warranty, and a local Melbourne team available whenever you need support. Your first sediment filter replacement at 6 months is included free.

Protect Your Home with Melbourne's Trusted Whole House Water Filtration

Get cleaner, healthier water from every tap. Armour’s whole home filtration systems remove chlorine, sediment, and scale from Perth’s harsh water supply.

Melbourne Suburbs We Service

Armour Water Filtration services all suburbs across Greater Melbourne, from the inner city to the outer metropolitan fringe. Our Melbourne-based installers know the local pipe networks and water conditions.

Melbourne CBD

Fitzroy

Collingwood

Richmond

South Yarra

Toorak

Prahran

St Kilda

Port Melbourne

Docklands

Carlton

Brunswick

Essendon

Moonee Ponds

Coburg

Preston

Northcote

Thornbury

Heidelberg

Bundoora

Mill Park

Epping

Craigieburn

Sunbury

Balwyn

Box Hill

Glen Waverley

Doncaster

Ringwood

Croydon

Lilydale

Belgrave

Knox

Boronia

Brighton

Bayside

Moorabbin

Cheltenham

Mentone

Frankston

Mornington Peninsula

Dandenong

Cranbourne

Berwick

Footscray

Sunshine

Werribee

Hoppers Crossing

Point Cook

Altona

Williamstown

Melton

Not sure if we cover your suburb? Call us on (08) 9563-8892 or send an enquiry. We service all major suburbs across Greater Melbourne and are always happy to confirm.

Trusted by Homeowners

Proven Testimonials and Credentials You Can Trust

Our testimonials reflect the trust and satisfaction of homeowners who have experienced the benefits of cleaner, better quality water. Backed by proven systems, professional installation, and industry knowledge, our credentials demonstrate a commitment to reliable service, quality workmanship, and results you can depend on with confidence.

We had ongoing issues with hard water and scale buildup throughout our home. After installing the whole house filtration system, the difference was immediate. No more chlorine smell, better tasting water, and our showers feel much softer. The installation was smooth and professional.

Michael T. – Rockingham WA

Armour Water Filtration explained everything clearly and recommended the right system for our home. The water quality has improved dramatically, and even our appliances seem to be running better. Great service from start to finish.

Rebecca L. – Mandurah WA

I was concerned about contaminants in our local water supply. The team conducted a proper water assessment and installed a tailored system. The water tastes clean and fresh now, and we have peace of mind knowing it’s filtered at every tap.

Jason M. – Fremantle WA

Our skin and hair feel noticeably better since installing the filtration system. The chlorine smell is completely gone, and even our glassware looks clearer. Highly recommend Armour for anyone in Perth looking for whole house water filtration.

Natalie P. – Joondalup WA

Professional, knowledgeable, and reliable. The installation was quick and tidy, and they walked us through how the system works. It’s reassuring to know our family is using cleaner, safer water every day.

Daniel R. – Midland WA

We installed a whole house water filtration system and the difference was immediate. The chlorine smell is gone, our showers feel better, and even the water tastes cleaner. The team was professional and explained everything clearly. Highly recommend Armour Water Filtration.

James T. – Perth, WA

After getting our water tested, we chose an under sink reverse osmosis system. The drinking water quality is outstanding and we no longer buy bottled water. Installation was smooth and the service was excellent from start to finish.

Melissa R. – Melbourne, VIC

Living on bore water, we had issues with iron staining and odour. Armour designed a customised system that completely solved the problem. Our water is now clear, clean and reliable. Very knowledgeable team and great results.

Thomas K. – Mandurah, WA

Professional service, clear advice, and a filtration system that delivers consistent results. A smart upgrade for any household concerned about water quality.

Water Filtration FAQs

Frequently Asked Questions About Water Filters in Melbourne

Does Melbourne water need to be filtered?

Melbourne's source water is among Australia's cleanest, but source quality and tap water quality are two different things. By the time water travels through Melbourne's distribution network, it picks up chlorine, chloramines, sediment from older pipes, and in some areas trace heavy metals. Filtration improves what actually comes out of your tap, regardless of how clean the reservoir water was to begin with.

Why does Melbourne tap water taste like chlorine?

Melbourne Water uses chlorine and chloramines to disinfect the supply and maintain safe bacteria levels across the distribution network. The further your home is from the treatment plant, the higher the residual disinfectant concentration needs to be. Armour's Stage 2 KDF-55 and coconut carbon filter significantly reduces chlorine and chloramines, improving taste and removing chemical odour.

Is Melbourne water hard or soft?

Melbourne water is considered moderately soft compared to Perth, but it still contains hardness minerals that cause scale on shower screens, inside hot water systems, and on tapware over time. Armour's Stage 3 limescale reduction filter addresses mineral scale buildup throughout your plumbing and appliances.

How much does a water filter cost in Melbourne?

The Armour Whole Home Filtration System starts from $3,000 fully installed, including the system, professional installation, 5-year warranty, and your first free sediment filter replacement at 6 months. Flexible payment options with no upfront cost are available.

Can you install a water filter in a Melbourne apartment?

Yes, as long as your apartment has an individual accessible mains water connection. Our Melbourne team has experience with a wide range of apartment and unit configurations across the inner city and middle-ring suburbs. Contact us to confirm suitability for your specific property.

How long does installation take in Melbourne?

Most Melbourne installations are completed in 1 to 2 hours by our licensed local technicians.